2019 CATERPILLAR D6K2 XL

2019 Caterpillar D6K2 XL Dozer ONLY 3,100 Hours ARO Wired Genuine CAT Ripper Factory Sweeps Good Undercarriage Fresh 250hr Service & Powertrain Warranty

Make: Caterpillar | Model: D6K2 XL | Year: 2019 | Hours: 3,100 | Power: 130HP | Weight: ~13t | Config: XL undercarriage

A genuinely low-hour, late-model 2019 Caterpillar D6K2 XL dozer with only 3,100 hours on the clock, this is one of the tidiest D6K2s youll find on the Australian market. The D6K2 is the well-proven machine that Caterpillar renamed the D4 in 2021, powered by the clean and efficient Cat C4.4 ACERT engine with a smooth hydrostatic transmission and the latest grade-control technology in its class. This one is set up right: ARO wired (Attachment Ready Option) for a plug-and-play GPS upgrade, factory sweeps fitted, screens to be fitted, a genuine CAT ripper, and a good undercarriage. Comes with a fresh 250-hour service, comprehensive workshop report, and the usual Makin Traks 3-month powertrain warranty for total peace of mind. Fully prepared through our brand-new purpose-built facility on the Sunshine Coast QLD. Ready to earn from day one.

Only 3,100 Hours why it matters: For a 2019 machine, 3,100 hours is genuinely low this dozer has barely been run in by dozer standards. A D6K2 will comfortably work many thousands of hours more, which means the next owner gets years of productive life with minimal wear, a fresh undercarriage, and none of the high-hour worries that come with most used dozers. Low hours like these on a late-model Cat are increasingly hard to find.

Why ARO Wired matters: This machine is Attachment Ready Option (ARO) wired from the factory the wiring loom and mounts for a GPS grade-control system are already in place. When youre ready to add Trimble, Topcon or Cat grade control, its a plug-and-play upgrade rather than a costly full retrofit, saving you $5,000 - $8,000 + in wiring and installation. For a contractor planning to run GPS, that makes this machine significantly more valuable.

Best Features:

ONLY 3,100 HOURS genuinely low hours for a 2019 machine; years of productive life ahead

ARO wired (Attachment Ready Option) factory-wired for plug-and-play GPS grade-control upgrade; saves $5,000-$8,000+ vs retrofit

Genuine CAT ripper factory Cat ripper fitted, ready to tear into hard ground and tree roots

Factory sweeps fitted, screens to be fitted set up for forestry, land clearing and the hard jobs

Good undercarriage plenty of working life remaining before the next UC spend

Cat C4.4 ACERT twin-turbo diesel 130HP net (138HP gross); clean, efficient, proven power

Hydrostatic transmission smooth, infinitely-variable speed control; effortless to operate, reduced fatigue

XL undercarriage configuration the most popular Aussie config; ideal balance of flotation, stability and ground pressure

6-way VPAT blade angle, tilt and pitch hydraulically controlled from the cab

Grade-control ready with ARO wiring done, GPS is a simple bolt-on; Cat Slope Indicate standard

Fully enclosed EROPS cab with A/C climate controlled, dust sealed, full-day comfort

The machine Cat now calls the D4 same proven C4.4 drivetrain, well-supported with parts Australia-wide

Full Specifications:

Year: 2019

Hours: 3,100 (genuinely low)

Make / Model: Caterpillar D6K2 XL (now badged D4)

Engine: Cat C4.4 ACERT twin-turbo diesel

Power: 130 HP net (97 kW) / 138 HP gross

Transmission: Hydrostatic with electronic control

Steering: Joystick / electronic differential steering

Blade: 6-way VPAT (Variable Pitch Angle Tilt)

Ripper: Genuine CAT ripper fitted

Wiring: ARO wired (Attachment Ready Option) for GPS

Undercarriage: XL configuration, good condition

Protection: Factory sweeps fitted; screens to be fitted

Operating weight: ~13 tonnes (XL configuration)

Cab: Fully enclosed EROPS, A/C, climate control

Grade Control: ARO wired, ready for Trimble / Topcon / Cat GPS upgrade

Included with Purchase:

Fresh 250-hour service completed prior to delivery

Comprehensive workshop inspection report

All work carried out in our brand-new purpose-built workshop on the Sunshine Coast, QLD

Makin Traks 3-month powertrain warranty

Genuine CAT ripper, factory sweeps fitted; screens to be fitted

ARO wiring in place for GPS grade-control upgrade

Ready to work all systems checked and operational

Australia-wide transport can be arranged

Finance options available

Ideal for: Civil contractors Subdivision & land development Finish grading Forestry & land clearing Agricultural & station properties Council fleets Dam and pad building Owner-operators wanting a low-hour, GPS-ready, late-model Cat dozer with workshop-backed peace of mind

Inspections welcome Makin Traks workshop, Sunshine Coast, QLD. Contact Daz Scale or email mkntraks@gmail.com to book a look.

PRICE: $318,890 including GST

Drive-away pricing available on request. Transport & finance can be arranged Australia-wide.