CATERPILLAR D6N XL BULLDOZER (STOCK NO. 95513)
Finance Estimate
From $1,028.46*
per week
From 7.98% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 7.98% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 7.98% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Features
Title | CATERPILLAR D6N XL BULLDOZER (STOCK NO. 95513) |
Type | Dozers |
Sub Type | Crawler and Swamp |
Class | Crawler |
Make | CATERPILLAR |
Model | D6N XL |
Series | BULLDOZER (STOCK NO. 95513) |
Sale Price | $220,000 Price ex GST |
Listing Type | Used |
Stock Number | D6N 95513 |
RefCode | TA1219719 |
Hours | 9690 |
Description
Caterpillar D6N XL Bulldozer (Stock No. 95513) CAT D6 Dozer
- VPAT Blade, A/C ROPS Cabin, Rippers, Rear Bash Guard, Heavy Duty Side Tank Guards, Dual Slope Boards (removed but can be re-fitted), TopCon GPS Ready
Work done so far to machine in the last 1200 hours approx
- 1000 hour service completed
- All new CAT filters
- New sump drain valve
- New transmission drain plug
- Removed old blade slope boards
- 3 x new ripper boots fitted
- Fitted new cutting edges
- All new bottom track frame wear strips
- All new front and rear angle cylinder blade bearings x 4
- All new lift cylinder blade bearings x 4
- All new tilt cylinder blade bearings x 2
- New c-frame pins and bearings
- Re-sealed pivot shaft seals (both sides)
- New track adjuster cannon seals and bearings (both sides)
- Rebuilt equalizer bar (new pins/bearings/seals)
- Linebored c-frame main pivot pin bores
- Linebored c-frame lift cylinder rod end bores
- New equalizer bar centre pin bushings in machine main frame
- Linebored both track frame equalizer bar side pin bores
- 8 x new track chain master bolts
- New c-frame plugs and spacer rings
- All new bottom blade dogbone bearings x 2
- New blade angle cylinder barrel end pins x 2
- All new blade dogbone spacers x 4
- Re-sealed LHS blade angle cylinder
- Re-sealed RHS blade angle cylinder
- Re-sealed LHS blade lift cylinder
- Checked all other blade cylinder seals
- A/C re-gassed and tested
- Completed paint touch ups
- Cleaned and detailed inside cab
- Repainted part of cabin floor interior
- New front and rear genuine CAT floormats inside cab
- New ripper cylinder retaining bolts
- 1 x new engine door latch
- Some new spiral wrap on blade
- New interior side carpet inside cab
- One new pivot shaft o-ring
- New hydraulic compensator fitted by CAT. Adjusted into spec
- Capped off old aftermarket control valve for old slope boards
- Fitted new roof plate to sweeps
- Fitted new side and rear screens
- Installed new decal kit
- Repaired crack in muffler box
- 1 x new hose under machine
- New blade joystick handle
- Fitted new stick rake and tree pusher
- Re-skinned blade
- Fitted new alternator
Wholesale Price ---- $220,000+GST including Stick Rake & Tree Pusher + New Chains fitted
Due to staff shortages, inspections are by prior arrangement only
- VPAT Blade, A/C ROPS Cabin, Rippers, Rear Bash Guard, Heavy Duty Side Tank Guards, Dual Slope Boards (removed but can be re-fitted), TopCon GPS Ready
Work done so far to machine in the last 1200 hours approx
- 1000 hour service completed
- All new CAT filters
- New sump drain valve
- New transmission drain plug
- Removed old blade slope boards
- 3 x new ripper boots fitted
- Fitted new cutting edges
- All new bottom track frame wear strips
- All new front and rear angle cylinder blade bearings x 4
- All new lift cylinder blade bearings x 4
- All new tilt cylinder blade bearings x 2
- New c-frame pins and bearings
- Re-sealed pivot shaft seals (both sides)
- New track adjuster cannon seals and bearings (both sides)
- Rebuilt equalizer bar (new pins/bearings/seals)
- Linebored c-frame main pivot pin bores
- Linebored c-frame lift cylinder rod end bores
- New equalizer bar centre pin bushings in machine main frame
- Linebored both track frame equalizer bar side pin bores
- 8 x new track chain master bolts
- New c-frame plugs and spacer rings
- All new bottom blade dogbone bearings x 2
- New blade angle cylinder barrel end pins x 2
- All new blade dogbone spacers x 4
- Re-sealed LHS blade angle cylinder
- Re-sealed RHS blade angle cylinder
- Re-sealed LHS blade lift cylinder
- Checked all other blade cylinder seals
- A/C re-gassed and tested
- Completed paint touch ups
- Cleaned and detailed inside cab
- Repainted part of cabin floor interior
- New front and rear genuine CAT floormats inside cab
- New ripper cylinder retaining bolts
- 1 x new engine door latch
- Some new spiral wrap on blade
- New interior side carpet inside cab
- One new pivot shaft o-ring
- New hydraulic compensator fitted by CAT. Adjusted into spec
- Capped off old aftermarket control valve for old slope boards
- Fitted new roof plate to sweeps
- Fitted new side and rear screens
- Installed new decal kit
- Repaired crack in muffler box
- 1 x new hose under machine
- New blade joystick handle
- Fitted new stick rake and tree pusher
- Re-skinned blade
- Fitted new alternator
Wholesale Price ---- $220,000+GST including Stick Rake & Tree Pusher + New Chains fitted
Due to staff shortages, inspections are by prior arrangement only